Interactive Use of Altair Compose for Calculations, Scripts, CAE Data Readers, and Post-processing

Digital Twin is enjoying a breakthrough, fueled by advances in the sophisticated use of physics-based simulation models of varying fidelities. Connected and informed by data from the field with the help of artificial intelligence, Leonardo S.p.A. validates the performance of product systems virtually in the early stages of design to accelerate the development of their next generation of products.

Dactem (a DAM group company), developer of specialist test, measurement and assembly solutions for the aerospace industries, presents an overview of the optimization of a thrust balance used for accurate measurements in electrical thruster qualification endurance testing. The presentation will provide details on how a Multiphysics simulation approach was used to find the optimum design taking mechanical, thermal and electromagnetic performance into account. Speakers: Emmanuel Pouleau, CEO, Dactem (a DAM Group company) Pierre Moutet, Engineer, Dactem (a DAM Group company) Duration: 15 minutes

This workshop demonstrates how a simulation-driven design approach to product development can have a drastic impact on the performance, design time, and profitability of a new product. Using a belt sander tool as a demonstration model, our presenters show how Altair’s design and simulation technologies can conduct a concept design analysis and optimization of the sander external housing to improve stiffness and reduce weight. They go on to show how we can simulate the manufacturing process itself by looking at filling, packing, cooling and warpage of the plastic housing; before concluding with a series of stress analysis and validation studies such as a virtual drop test, 3-point bending simulation and even a study of the effect of the heat transfer of the electric motor. This is a valuable session to see how simulation technologies can be used throughout the design process, adding value and reducing development time at each stage. Speakers: Ujwal Patnaik, Global Business Development Manager, Altair Chris Sambell, Application Engineer, Altair Duration: 60 minutes

Electrification is everywhere! It brings energy efficiency into systems and also helps add new smart functionalities to products. The electric motor is a key element of such systems, converting electricity into mechanical power. It is multiphysics by nature. Electric machine engineers need to take into account various constraints from the early stage of the design, looking at electromechanical performance, as well as respecting thermal and NVH constraints. Simulations need to integrate these multiple physics and also coupling effects. Dedicated tools and streamlined multiphysics workflows are developed in order to reduce complexity and speed up the design. Speakers: Limin Huang, Electromechanical Engineer, Altair Samia Saaidi, Senior Technical Specialist - Electromechanical Solutions, Altair Duration: 20 minutes

The increasing complexity of machines requires active management and evaluation of potential product failures and simulation of physically accurate conditions during development. Achieved through multiphysics simulation, Altair SimLab can simulate a wide range of interacting physical models including fluid-structure interaction (FSI) and thermomechanical simulation. By helping with complex design problems, simplified modeling workflows give a deeper understanding of phenomena and root causes of unwanted behavior.

To design today’s tightly packaged electronic systems it is essential to create a thermal analysis model of the PCB within its enclosure. Learn how Altair SimLab provides robust and repeatable workflows for fast, accurate, and consistent analysis, even for occasional users allowing them to confidently identify and correct potential design issues earlier in development with accurate thermal analysis that doesn’t require advanced CFD knowledge.

AAM has been providing mechanical drivelines to automotive customers for more than 25 years. As the automobile transitions to electrification, so too must the driveline. AAM has developed a suite of innovative, lightweight, compact and cost-optimized electric drive units and electric beam axles to meet the growing global technology demand as electric vehicles continue to expand over the next decade. Engineering simulation, optimization and validation tools were significant enablers to increase the validation confidence and reduce the time to market for these new products.

An intuitive and robust CFD workflow is available in Altair® SimLab® - a process-oriented, feature-based finite element analysis software that allows you to quickly and accurately simulate the engineering behavior of complex assemblies. For fluid and thermal analyses, SimLab can make the model setup process even faster, repeatable, thereby minimizing tedious manual steps that can be automated. A live demo will be performed using real-world models to show the simple and smooth analysis process in Altair SimLab that goes from CAD to results in minutes.

For the past three decades, Altair’s optimization solutions have driven the innovative, lightweight, and structurally efficient designs of many products you see and use every day. The intense focus on additive manufacturing in recent years have given a boost to topology optimization and generative design, providing more freedom to explore alternatives. Today, we keep on innovating the technology, looking at including multiple physics, like thermal, electromagnetics, and fluid flow to drive design. Altair AcuSolve – coupled with Altair Optistruct – enables engineers to find the optimum shape by simply defining inlets, outlets, and the allowable space in which the solver can work. AcuSolve’s gradient-based topology optimization method will quickly and efficiently find the path of least resistance to deliver fluid flows with minimal effort.

Nowadays, many Machine Learning techniques able to identify dynamic models from data are taking hold. But, can we support the learning phase leveraging our expertise obtaining models with better generalization property? To tackle this need and others we have developed a novel approach, romAI. This application combines AI and system modeling techniques to generate reusable continuous dynamic models extremely time-efficient, hence used as Reduced-Order Models to speed-up system design and optimization or in Digital Twins/Simulators for real-time applications.

The ever-advancing digitization is being driven by the convergence of simulation, data, and HPC. While virtual methods, interoperable tools, and standardized interfaces become state of the art, the engineers and their management will play a significant role to break down silos and benefit from a Digital Thread. In this fireside chat, we will discuss the importance of people to unleash the potential of Digital Twins, how they can combine the different fields of product development and what is still missing to make the connection.

AI-powered real-time melt-pool analytics for accelerated product development and production.

What if you could create 1D simulation models that retain the precision of your 3D analysis while running up to thousands of times faster?

The usability of a headset is largely determined by a comfortable fit and its resistance to everyday use. Learn from Alice Lin, Manager of Mechanics at GN Audio R&D how she introduced FEM simulation capabilities at Jabra. The presentation shows how product design benefits from structural analysis, design for comfort, and drop test simulation. A future extension of simulation capabilities intends to address more areas and improve the simulation-driven design process efficiency. Speaker: Alice Lin, Manager of Mechanics, GN Audio Duration: 22 minutes Click the AD icon to select alternative audio translations - French, German, Portuguese and Spanish.

The Digital Twin concept is broadly applicable to all Altair customer base wanting to develop better products faster. We will explain how to maximize the value you can get from the Altair Platform for Digital Twins. We will illustrate how this solution helps diverse engineering teams develop better, more complex products faster by avoiding work in silos. This will include proven uses cases for the convergence of simulation and data.

Altair products are quickly evolving into AI-driven products. Starting from the modeling and visualization products, the latest release of Altair HyperWorks includes features like shapeAI, which quickly finds and classifies parts “by shape” inside geometry files or finite element meshes - when you want to locate all of the bolts, shafts, and gears in a complex assembly - by applying machine learning.

Several OEMs currently face the challenge of information silos due to poor integration of models across the product life cycle. Furthermore, there is limited reuse of models between programs and the variation of modeling maturity across various Engineering disciplines results in lack of traceability. In this short presentation, we will look at solutions and workflows that leverages a systems model as a common language of communication while facilitating various types of real time dashboards and visualization to help understand and optimize the entire Mechatronic system performance.

Presented at the ATCx Heavy Equipment in May 2021.

Speaker: Keshav Sundaresh, Global Director – Smart Systems & Mechatronics, Altair

Duration: 20 minutes

G.S. Vidyaprakash presents how Lakshmi Machine Works Ltd. drives the design process with simulation. In his presentation First Time Right Machine Design with CAE Simulation, he discusses reliable simulation techniques to predict & prevent failure modes.

Brett Chouinard, President and COO of Altair discusses Development challenges in Industrial machinery and illustrates how Altair's scalable simulation solutions provide the environment for simulation-driven innovation and how machine learning expands the capabilities furter.

Dr. Fatma Kocer VP, Engineering Data Science at Altair showcases the impact of AI in development environments. In particular on how CAE tools will evolve and Design Exploration is taken to the next level.

Controller strategy expert Lorenzo Moretti presents how to improve Cobot collaboration. In the context of virtual commissioning, he discusses how more meaningful controller design is possible with realistic plant models.

Felix Koerfer, Technical Consultant at Altair, gives a Demo Sessions on Altair Simulation Solutions for faster evaluation of real-world machines, explaining how accurate structural assessment with real loading conditions allows assessment of global stress and deformations, evaluation of bolt forces, and how accuracy & deformation of linear bearings cna be achieved.

Christian Kehrer, Business Development Manager System Modelling, gives a Demo Sessions on Altair Simulation Solutions for faster evaluation of real-world machines, explaining how CNC control optimization is performed to realize toolpath error correction of a CNC milling machine, with system simulation and how more effective controller design with realistic plant models is realized.

Benoit Pelourdeau presents how Stanley Robotics SAS drives the design process with simulation, to develop the world's first robotic car storage service. Learn from him how the interdisciplinary mechatronic product development team succeeds with accurate virtual prototypes.

Indradev Babu, Managing Director, UCAM PVT LTD, explains how he developed a CNC Jobshop to the largest manufacturer of CNC Rotary tables—presenting different development examples, he explains how Simulation Driven Design helps him to differentiate and what simulation Strategies he implements in the customer-centric development for the following generation Machine Tools at UCAM.

Industry expert Dennis Baum presents how Weber Maschinenbau applies simulation, how simulation can be used along product lifecycle and which benefits arise to customers and internal processes.

Mr. Vijay Zala and Mr. Pragnesh Zala present development methodologies for new economic machine generations and showcase why Jyoti CNC Automation Ltd. sets simulation at the core of the development strategy.

Industry Innovator Luca Gatti Luca invites you to a virtual coffee break, to see why it is necessary to model and deeply study the physics behind a cup of coffee. Learn why Gruppo Cimbali SpA is creating digital twins of their coffee machines to fully embrace the digital transformation.

Dr. Royston Jones, CTO and Dr. Anthony Hahnel, Technical Director, give their keynote presentation during the ATCx Driving Innovation in Electric Powertrain 2021.

Andrew Dyer, Senior Tech Specialist at Altair in the US, Gabriele Piombo, EngD Partner with Altair at the University of Warwick, and finally Prof. James Marco, Professor of Systems Modelling and Simulation at the University of Warwick, present - Rapid Battery Layout Optimization using 0D / 1D in a Systems Environment. Together they will discuss the use of a 1D Systems approach to simulate a battery module. This includes the cell, cooling plate & busbar and is subjected to a typical extreme duty cycle. A typical event is simulated where the maximum allowable temperature is exceeded which triggers an increase in the cooling flow rate. This system is then optimised.

Stephen White, Technical Support Manager, introduces Altair SimLab, a process-oriented, feature-based finite element modeling software that allows you to quickly and accurately simulate behaviour of complex assemblies. SimLab covers multiple physics including structural, thermal and fluid dynamics which can be easily setup and automated, helping to drastically reduce the time you spend creating finite element models and interpreting results.

BMW Motorrad is the motorcycle division of BMW, a German multinational company manufacturing luxury automobiles and motorcycles. With the first motorcycle manufactured in 1923, their current product line includes a variety of shaft, chain, and belt-driven models designed for off-road, dual-purpose, and sports powered by a variety of engines ranging from a single cylinder, various two cylinder (parallel twin, flat twin, boxer etc.), four cylinders inline and six-cylinder inline ones. BMW Motorrad faced a challenge with their model build processes, needing to move previously outsourced crankshaft modeling work in-house while also reducing lead time. Through a semi-automated modeling process based on Altair SimLab, BMW Motorrad developed scripts which reduced FE model generation time down 80%, from 2 weeks of manual work to just half a day. Ruediger Ott, HyperWorks Business Development at Altair, presents a use case from BMW Motorcycles who found that they could significantly reduce the model build time of their powertrain assemblies with SimLab, making use of the automation capabilities to minimize manually effort and refinement.

Altair CTO James Dagg presents an overview of the journey Altair took to develop the leading modeling and visualization technologies we have today, and provides a look at what’s coming next to help you reduce your product delivery time. James Dagg has been at Altair for more than 30 years and is a visionary behind Altair’s software strategy and development activities. He has also led the development of Altair’s concept design technologies and oversaw the development of Altair’s CAE software suite for more than a decade.

In this presentation, MIRDC’s Bionic Intelligent Automatic Guided Vehicle (BI-AGV) is introduced. This “collaborative handling module” has three characteristics of wireless intelligence, flexible use and flexible movement. Through the wireless intelligent collaborative handling system, it can control several automatic guided vehicles (AGVS) in real time, and several vehicles can conduct remote control and serial connection to carry out handling tasks. At the same time, the 360-degree mobile omni-directional wheel design framework is adopted. It has the advantages of flexible use in the area where the traditional unmanned vehicle cannot run smoothly in the indoor narrow space.

Pete Darnell, Vice President, Software Development at Altair discusses why embedded development tools must track the ever-increasing complexity and feature set of microcontrollers as well as demands from new markets like the Cloud based “Internet of Things”. He looks at trends in the microcontroller space and discusses how block diagram model-based development tools can be used to abstract these changes to ease firmware development. He also looks at the thing side of IoT and the challenges of power management to extend battery life and what it will take to provide secure over-the-air firmware updates. The recording is about 19 minutes long, and was presented at the 2020 Global Altair Technology conference.

Altair’s portfolio of simulation-driven design solutions covers – amongst many other disciplines – electromagnetics (EM) and electronic design automation (EDA).

More and more engineers need to solve problems that can span multiple physics including structural, thermal, electromagnetics, and fluid dynamics.

The world is full of bulk and granular materials. From ores being mined, soil being excavated, rocks being conveyed, or powders being processed - over 70% of all industrial processes involve the handling or processing of these challenging materials.

Simulation-driven design powered by topology optimization was created by OptiStruct over two decades ago. Its success has changed the CAE/CAD industry as today all vendors have embraced this trend.

Winning the innovation race for mechatronics products requires a tool set which can support a multi-disciplinary development process from early concept design up to in-service support.