Resource Library

When designing an electric motor, constraints from different physics must be fulfilled. Electric motor design requires multi-physics analysis: Altair® SimLab® provides a single user experience for all these different physics.

Inside SimLab, Altair® Flux® can be invoked to run the electromagnetic

Electrification is everywhere! It brings energy efficiency into systems and also helps add new smart functionalities to products. The electric motor is a key element of such systems, converting electricity into mechanical power. It is multiphysics...

Dactem (a DAM group company), developer of specialist test, measurement and assembly solutions for the aerospace industries, presents an overview of the optimization of a thrust balance used for accurate measurements in electrical thruster qualifi...

This workshop demonstrates how a simulation-driven design approach to product development can have a drastic impact on the performance, design time, and profitability of a new product.

Using a belt sander tool as a demonstration model, our presenters show how Altair’s design and simulation techn

To design today’s tightly packaged electronic systems it is essential to create a thermal analysis model of the PCB within its enclosure. Learn how Altair SimLab provides robust and repeatable workflows for fast, accurate, and consistent analysis,...

AAM has been providing mechanical drivelines to automotive customers for more than 25 years. As the automobile transitions to electrification, so too must the driveline. AAM has developed a suite of innovative, lightweight, compact and cost-optimi...

An intuitive and robust CFD workflow is available in Altair® SimLab® - a process-oriented, feature-based finite element analysis software that allows you to quickly and accurately simulate the engineering behavior of complex assemblies. For fluid ...

For the past three decades, Altair’s optimization solutions have driven the innovative, lightweight, and structurally efficient designs of many products you see and use every day. The intense focus on additive manufacturing in recent years have gi...

The usability of a headset is largely determined by a comfortable fit and its resistance to everyday use. Learn from Alice Lin, Manager of Mechanics at GN Audio R&D how she introduced FEM simulation capabilities at Jabra. The presentation shows ho...

The increasing complexity of machines requires active management and evaluation of potential product failures and simulation of physically accurate conditions during development. Achieved through multiphysics simulation, Altair SimLab can simulate...

The objective of this webinar is to present an intuitive and robust CFD workflow available in Altair® SimLab® and to expose the features that can make model setup process even faster, thereby minimizing/avoiding any manual or repeatable steps. A l...

As products become more and more complicated, the coupling of multiple physics is becoming more the need in product design cycles. A product engineer is many at times required to not just do a structural analysis, but also, thermal or CFD or at ti...

To design today’s tightly packaged electronic systems it is essential to create a thermal analysis model of the PCB within its enclosure. Learn how Altair SimLab provides robust and repeatable workflows for fast, accurate, and consistent analysis,...

The focus of the webinar is to present an intuitive and robust workflow available in Altair® SimLab® for product engineers and analysts to perform linear and non-linear analysis with ease. The webinar will focus on the capabilities of Simlab in se...

Electronic system design (ESD) is having a greater influence on almost every type of product requiring new simulation tools to help achieve electronic, electrical, mechanical, thermal, and connectivity goals. Altair’s simulation-driven design tool...

Brett Chouinard, President and COO of Altair discusses Development challenges in Industrial machinery and illustrates how Altair's scalable simulation solutions provide the environment for simulation-driven innovation and how machine learning expa...

Felix Koerfer, Technical Consultant at Altair, gives a Demo Sessions on Altair Simulation Solutions for faster evaluation of real-world machines, explaining how accurate structural assessment with real loading conditions allows assessment of globa...

Stephen White, Technical Support Manager, introduces Altair SimLab, a process-oriented, feature-based finite element modeling software that allows you to quickly and accurately simulate behaviour of complex assemblies. SimLab covers multiple physi...

BMW Motorrad is the motorcycle division of BMW, a German multinational company manufacturing luxury automobiles and motorcycles. With the first motorcycle manufactured in 1923, their current product line includes a variety of shaft, chain, and bel...

Altair CTO James Dagg presents an overview of the journey Altair took to develop the leading modeling and visualization technologies we have today, and provides a look at what’s coming next to help you reduce your product delivery time.

James Dagg has been at Altair for more than 30 years and i

Manufacturers today are tasked with designing smart, connected products at a breakneck pace to stay ahead of the competition. As performance demands continually increase, packaging sizes become smaller, and device connectivity becomes more critica...

Speaker design and analysis, especially for a more complex product, system, or component, often requires building multiple simulation models. The loudspeaker development process involves multi-physics and multiple sources in parallel, to multiple ...

Nowadays to remain competitive, the need to constantly improve injection molding processes can benefit from modern technological advancements that simulation offers to overcome known disadvantages.

Designing consumer electronics for mass production requires a team of experts focusing on various aspects of design and manufacturing process. With a fragmented engineering process, exchange of models and information can cost valuable time in a competitive landscape.

This webinar presents Altair’

Consumer Electronics products are getting more complex every day. This often requires more physics to be addressed during the design phase, while the development cycles are getting shorter.

This webinar presents Altair’s workflow to enable simulation of structural, thermal, acoustics and fatigue

Altair Expert CAE platform includes high end CAE tools for CAE experts to any simulation, computational fluid dynamics (CFD), finite element analysis (FEA) or electromagnetics are only a few examples which needs your business might have. In this w...

As high-tech electronics companies adopt Multiphysics solutions, they may introduce new complexity in the development process coupling multiple tools. Model setup, remeshing, and design modification offer no additional value and increase the product lead time.

This webinar presents Altair’s sing

Altair provides an industry-leading portfolio of multiphysics-enabled software to simulate a wide range of interacting physical models including fluid-structure interaction, flexible bodies, aeroacoustics, and thermomechanical simulation. Together...

Altair offers industry-leading engineering analysis and optimization tools from simulation-driven design concepts to detailed virtual product validation, and simplified modeling workflows to advanced high-fidelity model building. Whether big or sm...

Altair software is used across industries to solve a broad range of electromagnetic problems from static to low and high frequencies. Whether your application requires multiple frequency and time-domain techniques with true hybridization to enable...

Simulation-driven design powered by topology optimization was created by OptiStruct over two decades ago. Its success has changed the CAE/CAD industry as today all vendors have embraced this trend.

More and more engineers need to solve problems that can span multiple physics including structural, thermal, electromagnetics, and fluid dynamics.

Altair SimLab is a process-oriented multidisciplinary simulation environment. It includes a complete solution for fluid and thermal analysis of complex assemblies, like the TFSI analysis of a heat exchanger.

Altair SimLab is a process-oriented multidisciplinary simulation environment. It includes a complete solution for electric motor modeling, coupled with Altair Flux.

Medical devices of all kinds must be designed to withstand the structural and operational requirements associated with normal use, drop, and misuse, all while balancing weight and cost considerations.

This webinar presents Altair’s workflow to enable simulation of structural, thermal, and fluid p

Altair SimLab is a complete solution for powertrain modeling and analysis. In this video, we demonstrate how to quickly replace a single component - a new housing - in a large assembly.

Solid welds can be quickly and automatically created in Altair SimLab, therefore enhancing the accuracy of the simulation model reproducing the physical behavior of a part or assembly.

The latest release of Altair SimLab includes an automated workflow to setup a topology optimization study on components withstanding fatigue loads. The solution leverages Altair OptiStruct's capabilities and enables to setup, run and analysis the optimization results all within SimLab.

Altair SimLab is a complete solution for powertrain modeling and analysis. The highly automated, process-driven workflow shown in this video illustrate how to go from CAD to analysis of a connecting rod in minutes.

BOTT stands for “Battle of the Twins,” a racing category for motorbikes with two-cylinder four stroke engines.

Bottpower is a Spanish motorsport engineering company located in Valencia. They specialize in designing and building custom motorbikes for racing and street use. They design and build pa