In-depth Optimisation with Altair Feko & HyperStudy

Radomes are a key part of antenna systems, which can seriously degrade transmitted and received signals. Modeling and simulation time for complex radomes can extend from days to weeks, and that also includes FSS structures embedded into them.

Safe and compliant electronic system design is important across all industries. Conforming to EMC regulations while reducing development costs and time requires the implementation of simulation throughout the product design lifecycle. With increased adoption organizations reduce design iterations and costly laboratory testing while meeting targets. Learn how Altair PollEx and Feko are used to simulate EMI/EMC at the board, subsystem, and system level.

In this workshop, you will get an insight into HyperStudy and learn about the key features and benefits of simulation- and data-driven optimization. Development engineers, designers and component managers face a wide variety of challenges in their daily work: Shortened development times have to be met, complexity and the number of variants continue to increase, multidisciplinary requirements for products sometimes go beyond the development process and are constantly changing. At the same time, they must be able to operate various modular systems.

Even in the age of fast and accurate EM simulation solutions, developing complex passive microwave components remains a challenging task. A novel hybrid solver solution is now available to address this design challenge and significantly shorten the development cycle for RF components. Offering a significant advantage over general solvers solely relying on 3D-FEM, this webinar will cover the rapid synthesis and optimization of such components using typical filter and horn antenna design examples.

Altair offers wide ranging multi-physics solutions spanning across various disciplines. Altair Feko is a comprehensive computational electromagnetics (CEM) software used widely in the telecommunications, automobile, aerospace, and defense industries. Hybridization of full wave and asymptotic methods enables the efficient analysis of a broad spectrum of EM problems, including antennas, microstrip circuits, RF components and biomedical systems, the placement of antennas on electrically large structures, the calculation of scattering as well as the investigation of electromagnetic compatibility (EMC). During this presentation, an overview of Altair along with capabilities of Feko are presented along with recent updates. Topics such as Characteristic Mode Analysis (CMA) and use of Machine Learning (ML) for antenna design are also discussed.

Using simulation to predict, analyze, optimize, and plan the coverage given by radio and radar systems is key to reduce development and planning times together with costs. Also, in some cases, this is the only feasible approach to identify and fix communication issues. This webinar overviews simulation strategies for propagation analysis in complex environments, including among others large-scale terrain, cities, or buildings with interior detail. Additionally, the effects of interference and jamming will be covered and how the frequency allocation for a system with many transmitters can be optimized automatically.

New technologies such as 5G, V2V-communication, e-mobility and IoT increase the number of electromagnetic field sources in the environment. When designing such electronic systems, compliance with electromagnetic radiation hazard standards (e.g., ICNIRP 2020) must be ensured. This webinar will discuss the hazards of electromagnetic radiation to personnel, ordnance, and fuel and how this can be mitigated through numerical field calculations with Altair technology. Defense, automotive and telecommunications case histories will be presented.

Innovation and digitization are key factors when designing advanced detection systems, autonomous vehicles, and stealth technology, where electromagnetic simulation has become essential. In this webinar, we will cover central concepts important to Radar Cross Section (RCS) and scattering calculations. This will include the exploration of various applications, highlighting some of the newest capabilities helping customers to solve challenging problems leveraging established and industry-leading solutions.

A radome is a structural enclosure that protects antennas and electronics from harsh weather and environmental factors without degrading electromagnetic signals to the radar. It is designed to have minimal impact on the electrical performance of the antenna and to withstand structural and wind loading performance requirements. They are used across multiple industries, including aerospace, defense, electronics, and telecommunications. Radomes, especially those containing multiple layers and curved FSS elements, are complex and the modeling and simulation of these systems can commonly take days and even weeks to complete. Altair’s streamlined radome simulation solution reduces this time to minutes. This webinar will overview Altair’s radome simulation solution and its application to design a radome system. Who Should Attend? This webinar has been designed to address the needs and challenges of engineering managers, EMC engineers, antenna engineers and designers, RF engineers, and Radio site engineers from military contractors (OEMs and their suppliers), defense governmental organizations (including navy, air force, army), and aerospace companies (OEMs and their suppliers).

Design of Experiments Using HyperStudy

ESS & Altair invites you to an engaging webinar on next-generation Robotics and Controls Lab. In this webinar, we will be demonstrating a unique visual approach to robotics by using a combination of Altair Digital-Twin technology & Altair Hardware-in-Loop Modelling environment. During this webinar, you will learn how to design & develop cutting-edge Robotics applications using Altair’s fail-safe Digital-Twin technology, Acrome Ball-Balancing Table Robot & Altair Model-Based Development tools. By adopting technologies like Digital-Twin, Multi-Domain Modelling and 1D to 3D Co-Simulation using Modelica interfaces and Hardware-in-loop modelling, the Indian R&D sector can eliminate catastrophic failures of systems downstream.

Join us for this OnDemand webinar, where Northrop Grumman engineer Keith Snyder demonstrates Altair Feko simulations to compare with measured patterns of a slant 45-degree omni directional antenna on a rolled edge ground plane. Advantages of using sampled nearfield currents in combination with large element physical optics (LE-PO) solution in Altair Feko in determining the far fields will be presented.

Wireless electronic devices these days often support both Bluetooth and Wi-Fi connectivity. The 2.4 GHz Wi-Fi frequency band is very close to the Bluetooth operating frequency. The co-existence of these two technologies within the same device lead to interference issues. This webinar presents Altair’s EM solution to solve the coexistence and interference issues in smart devices.

באיזה אופן אנו מטפלים באתגרים אלקטרומגנטיים ע"י שימוש בסימולציות? מה הצרכים הטכנולוגיים של תחום הסימולציות האלקטרומגנטיות, ולאן הוא מתפתח? כיצד אלטאר ממשיכה להיות מובילה בתחום הסימולציות? מה חדש בתוכנות האלקטרומגנטיות של אלטאר ? סקירת הכלים והחידושים לשנת 2020 במפגש זה נתמקד ביכולות בתחום הסימולציות האלקטרומגנטיות, ונכסה מגוון אפליקציות הנדסיות כגון: החזרי מכ"מ , התפשטות גלים אלקטרומגנטיים, בחירת מיקום והתקנה אופטימאלית לאנטנות, תכן אנטנות ,צימוד אנטנות,בטיחות קרינה, אנליזת כבלים, פגיעת ברקים ,התפשטות גלים, תכנון תקשורת שטחים אורבניים , אנליזות מכ"מ לרכב, PCB , SI , PI , מגנטים, מנועים, חיישני תדר נמוך ועוד. במהלך הפגישה : • יוצגו היכולות של Altair במגוון אפליקציות אלקטרומגנטיות. • יוצג שימוש מתקדם של כלי אופטימיזציה (HyperStudy) יחד עם אנליזת אנטנה ( Feko ) Evolution of EM Simulation Technology - from simple antenna design to complex virtual test scenarios Meet-up with Markus Schick, Electromagnetic Solutions Directeur, Altair -EMEA. Learn about where EM simulation comes from, where we are today and where we are going, industry trends and Altair’s answers to these; how we are expanding solution offering. This is not only a historical overview but also a deeper insight in the development process and how it can be accelerated. See EM and EDA from concept to production, from simple antenna design to complex scenarios involving virtual test flights/drives.

The Marine Engineering and Shipbuilding Industry is becoming even more important in the connected world. The ability to accelerate turnaround time and reduce cost is becoming a key driver to success. The use of simulation technologies to improve design efficiency and reduce physical testing costs continues to be one of the best ways to address engineering challenges in the Marine industry.

Advancements in 3D printing and optimizing parts for additive manufacturing is changing medical industry’s production approaches. Applications include dental implants, bone replacements, prosthetics, surgical instruments and many more. ​ This webinar presents Altair’s solution for designing parts for additive manufacturing for medical applications, reduce design and manufacturing cost, generate efficient designs and predict-fix manufacturing defect early.

Machine learning is a method of data analysis that automates analytical model building. As the antennas are becoming more and more complex each day, antenna designers can take advantage of machine learning to generate trained models for their physical antenna designs and perform fast and intelligent optimization on these trained models. Using the trained models, different optimization algorithms and goals can be run quickly, in seconds, for comparison and for types of different studies, such as for example stochastic analysis for tolerance studies etc. This short course presents the process of fast and intelligent optimization by adopting both the Design of Experiments (DOE) and machine learning using Altair FEKO. Examples to showcase the advantages of using machine learning for antenna design and optimization will be presented.

Medical stents are a lifeline for patients with cardiovascular illness and disease. Device manufacturers are required to dedicate large amounts of time and expense to clinical tests to validate safety and performance claims. Simulation can speed up these trials by satisfying the testing of variables virtually. This webinar presents Altair’s process for fast and intelligent stent optimization by coupling simulation, Design of Experiments (DOE) and machine learning algorithm to generate an analytical model.

In this webinar we showcase Altair’s unique electromagnetic simulation solutions combining antenna design and installed antenna performance with radio coverage analysis, including virtual flight and drive tests. We also cover fast modelling of radomes including FSS, speed up of platform model clean-up and meshing, new uses cases and technology for scattering and RCS, prediction of radio frequency interference, radio coverage and planning, spectrum management, additional related solutions on the Altair Partner Alliance and our software delivery models.

This workshop will showcase a process-oriented multidisciplinary simulation environment to accurately analyse the performance of complex rotating machines. The participants would learn about multiple physics analysis of motors; including electromagnetics, structural, thermal, and fluid dynamics using highly automated modelling tasks, helping to drastically reduce the time spent creating finite element models and interpreting results. Unique solution by Altair for rotating machinery process takes setup to a solution, time from hours to minutes which allows engineer to try multiple design iterations in a short time and create a performance curve in the automated environment.

CAD Based Parametric Optimisation Using SimLab St & HyperStudy

In this webinar we showcase Altair’s electromagnetic simulation solutions, which uniquely combine antenna design and wireless connectivity for a broad array of communication technologies, including among others, 5G, IoT, WiFi and RFID. As the trusted solution for smart device manufacturers around the world, Altair's electromagnetic solutions shorten development cycles for higher-performing products by accurately simulating the antenna(s) performance within the physical device and at the same time the performance of the device within the wireless network. The same solution at a communication system level is also used by leading organizations to analyze and design wireless networks, including the effect of the antennas, in complex scenarios like indoor, urban and rural

In this practical workshop we will present both the theory and background of the numerical techniques used, as well as presenting application examples and real-world cases studies on how such a process is used in the industry today. It will be a combination of presentation and demonstration of the best insight in the process. Due to increasing complexity and a higher demand for connectivity for all sorts of products, physical measurements are more and more enhanced by virtual testing, not only on component level but also for full platforms like vehicles, aircrafts, etc. in their environment. Simulation in the design stage is crucial for successful deployment. This workshop demonstrates the development process, from antenna evaluation to placing the antenna concepts on a platform and performing the virtual test drive / flight analysis also using optimization to increase the performance of the system. The numerical methods applied for such types of analysis,like full wave solutions for the antenna design and placement, as well as different wave propagation models like empirical models or dominant path solutions will also be discussed in more detail. Application examples from the automotive and aerospace domain will show time variant results for antenna systems on moving objects e.g. also for MIMO scenarios.

Many problems of electromagnetic compatibility and interference involve cables, which either radiate through imperfect shields and cause coupling into other cables, devices or antennas, or which receive (irradiation) external electromagnetic fields (radiated from antennas or leaked through other devices) and then cause disturbance voltages and currents potentially resulting in a malfunctioning system. Altair offers a comprehensive combined electromagnetic field and cable solution using the Multiconductor Transmission Line (MTL) method, as well as a hybrid solution combining MTL with Method of Moments (MoM+MTL), to solve the EMC/EMI problems involving cables. This webinar covers the cable analysis solution from Altair with a detailed overview of the methodology with examples.

5G is the next evolution of communication networks. With an exponential increase in consumer demands for high-speed data, the existing technologies can only sustain this demand for the next few years. We need a new technology with new capabilities, improved downloading and uploading speeds, and that can enable companies to control devices remotely in much more efficient and faster way than currently possible. This webinar presents Altair’s advanced computational tools for the propagation analysis and network planning of the emerging 5G technologies.

Characteristic Mode Analysis (CMA) enables a systematic approach to antenna design and antenna placement. The approach is based on insight in the fundamental resonance characteristics of antenna geometries and of the structures on which they are mounted. This insight aids in choosing the locations of the excitations on the antenna and of the antennas on the platform. Furthermore, knowledge of the coupling between excitations and modes enables the design engineer to synthesize the desired antenna pattern by exciting a linear combination of modal patterns. This webinar presents the applicability of CMA to antenna design with examples.

Machine learning is a method of data analysis that automates analytical model building. As the antennas are becoming more and more complex each day, antenna designers can take advantage of machine learning to generate mathematical models for their physical antenna designs and perform fast and intelligent optimization on these mathematical models. This webinar presents a process of fast and intelligent optimization by adopting both the Design of Experiments (DOE) and machine learning.

The key element of an electric vehicle (EV) is the battery and batteries are known to produce heat during their charge-discharge cycle. An efficient thermal management system (TMS) is of paramount importance. The battery TMS affects the cost, life, and range of the EV. A battery TMS study or an EV TMS study involves the use of thermal and fluid physics and Altair’s AcuSolve (Computational Fluid Dynamics based Simulation Technology), was used to carry out this study. The importance of finding new methods for effectively and accurately designing TMS that control temperature and optimize the performance of Li-ion batteries. This can be used to study and optimize the Battery Thermal Management System and other Thermal Management requirements arising in an electric vehicle which involves both active and passive cooling. A similar issue of heat (unwanted) exists in Motors as well, in this, we shall cover the Multiphysics simulation of Motors which shall include both electromagnetics and CFD Thermal studies of both air and liquid coolant motors.

Replacement of traditional combustion engines with an electric powertrain, bring electro-mechanical induced tonal and high-frequency whine noise. In addition, tire and aerodynamic turbulent noise become more prominent in the absence of a standard Internal Combustion Engine. Also, the perceived sound quality imposes a new set of challenges. This leads to completely new methods of NVH refinement, keeping the decades of research aside. As it is important to address these issues at the design and development stage, adopting the new simulation techniques to manage future NVH challenges in e-Mobility is of the prime challenge to the traditional NVH engineers. In this webinar, we shall discuss some of those key NVH challenges specific to electric vehicles and appropriate simulation processes to develop countermeasures.

Watch this webinar to see a demonstration of a multiphysics simulation approach using the Altair HyperWorks platform for the analysis of airborne radomes for electromagnetic , structural, aerodynamic, and bird strike performances.

Find out about the new features of HyperStudy 2019

New features and benefits of Altair Feko and WinProp in the 2019 release

This webinar will give an overview of WinProp's capabilities for the radio planning with real use cases showing the performance of WinProp in topographical, built-up, industrial, and indoor scenarios including live demonstrations at the end.

Key challenges for train/metro operators are increasing traffic volumes, ensuring passengers safety and security during their journey, as well as providing real time multimedia information and access to social networks in stations and tunnels. To meet these requirements various broadband telecommunication networks based on WiFi, GSM-R, LTE need to be put in place. This webinar will show how WinProp is used for the wireless network design and deployment in various railway scenarios including tunnels and metro stations, inside train wagons, as well as along railway tracks. Both antennas and leaky feeder cables can be deployed in the 3D environment of the station/tunnel scenario including the train.

Positive destinations of leavers is a key metric for any University. A major aspect in achieving this metric is to successfully develop industry ready graduates, possessing a well-proportioned balance between hands-on simulation/software experience, practical skills and a robust theoretical foundation. Based on Christophe's personal experiences of teaching Finite Element Analysis (FEA) and optimisation techniques to mechanical, automotive and aerospace engineering students, this presentation will discuss some of these metrics in greater detail, including: - The importance of collaboration between academia, industry and software suppliers. - Strategies for software implementation into undergraduate teaching. - Examples of success and perhaps some of lesser successful implementation. - The changing landscape of student expectations and previous experience. - Continuation into taught and research postgraduate studies

Given EVs are gaining momentum and the recent Govt. of India’s strict localization norms in EVs to avail incentives, Altair announces a 3-part webinar series to introduce its powerful and most comprehensive industry solution set for E-mobility from concept till end use. Open to startups, OEM and supplier alike, we invite you to join our 3-part live webinar series. We will discuss the various challenges in EV systems and how Altair solutions play an important role in the design & development stage. Namely, how you can cut down development time and cost while improving your designs, how you can rapidly prototype your ideas, tame the complexities involved in a highly complex system and lots more. We will highlight some unique challenges for EVs specific to India and discuss how to address them.

This webinar shows how Altair WinProp considers the full environment including buildings, cars, street objects in order to get accurate representations of the radio waves impinging on the installed car antennas and the multipath radar channels including reflections, diffractions and scattered contributions. For the efficient analysis the car objects can be also replaced by their corresponding radar cross sections (pre-calculated in Altair Feko). Thus allowing the realistic and fully reproducible evaluations of different options for the antennas and sensors including their integration and configuration.

Light-weight, low cost, compact, high efficiency are some of the many objectives and constraints that have to be considered when designing a rotating machine. To meet these various challenges it is necessary to take into account several physical aspects: - electromagnetic - structural - thermal This presentation shows how Altair HyperStudy can involve several Altair solvers to consider different requirements into a single optimization and will be illustrated through various examples.

In the early stage of the design of an electric machine, it is key to assess its potential in terms of global energy efficiency when submitted to specific duty cycles. This presentation will show how: - FluxMotor is able to extract efficiency maps in a very fast way. - FluxMotor can be coupled to Altair HyperStudy for design exploration and optimization studies, considering the efficiency over duty cycles as an objective function to be maximized.

In this webinar ‘RohrLEx’, FLUIDON piping expert, explains the relationship between pressure pulsations and pipeline problems and the advantages in using differently specialized software for this process of optimization. So, he presents both an automatic analysis of pressure pulsations in piping systems with DSHplus and HyperStudy as well as the integration of a control created in Activate.