Altair 2020 EM Online Meet-Up #2 with General Motors Israel Connectivity and Antennas Experts

The Mining industry faces a lot of challenges and remains under high pressure to control costs, improve operational efficiency as well as meeting stricter environmental regulations. Innovation and the use of technology play a key role in addressing these and in shaping the future of mining. This webinar will explore how simulation and advanced technologies such as digital twins, machine learning and Internet of things (IoT) can help mines increase productivity, reduce costs, and improve safety. You will hear from industry leaders and technical experts on how Altair’s solutions can be used for efficient development and operation.

Wireless electronic devices these days often support both Bluetooth and Wi-Fi connectivity. The 2.4 GHz Wi-Fi frequency band is very close to the Bluetooth operating frequency. The co-existence of these two technologies within the same device lead to interference issues. This webinar presents Altair’s EM solution to solve the coexistence and interference issues in smart devices.

באיזה אופן אנו מטפלים באתגרים אלקטרומגנטיים ע"י שימוש בסימולציות? מה הצרכים הטכנולוגיים של תחום הסימולציות האלקטרומגנטיות, ולאן הוא מתפתח? כיצד אלטאר ממשיכה להיות מובילה בתחום הסימולציות? מה חדש בתוכנות האלקטרומגנטיות של אלטאר ? סקירת הכלים והחידושים לשנת 2020 במפגש זה נתמקד ביכולות בתחום הסימולציות האלקטרומגנטיות, ונכסה מגוון אפליקציות הנדסיות כגון: החזרי מכ"מ , התפשטות גלים אלקטרומגנטיים, בחירת מיקום והתקנה אופטימאלית לאנטנות, תכן אנטנות ,צימוד אנטנות,בטיחות קרינה, אנליזת כבלים, פגיעת ברקים ,התפשטות גלים, תכנון תקשורת שטחים אורבניים , אנליזות מכ"מ לרכב, PCB , SI , PI , מגנטים, מנועים, חיישני תדר נמוך ועוד. במהלך הפגישה : • יוצגו היכולות של Altair במגוון אפליקציות אלקטרומגנטיות. • יוצג שימוש מתקדם של כלי אופטימיזציה (HyperStudy) יחד עם אנליזת אנטנה ( Feko ) Evolution of EM Simulation Technology - from simple antenna design to complex virtual test scenarios Meet-up with Markus Schick, Electromagnetic Solutions Directeur, Altair -EMEA. Learn about where EM simulation comes from, where we are today and where we are going, industry trends and Altair’s answers to these; how we are expanding solution offering. This is not only a historical overview but also a deeper insight in the development process and how it can be accelerated. See EM and EDA from concept to production, from simple antenna design to complex scenarios involving virtual test flights/drives.

Advancements in 3D printing and optimizing parts for additive manufacturing is changing medical industry’s production approaches. Applications include dental implants, bone replacements, prosthetics, surgical instruments and many more. ​ This webinar presents Altair’s solution for designing parts for additive manufacturing for medical applications, reduce design and manufacturing cost, generate efficient designs and predict-fix manufacturing defect early.

In this webinar we showcase Altair’s electromagnetic simulation solutions, which uniquely combine antenna design and wireless connectivity for a broad array of communication technologies, including among others, 5G, IoT, WiFi and RFID. As the trusted solution for smart device manufacturers around the world, Altair's electromagnetic solutions shorten development cycles for higher-performing products by accurately simulating the antenna(s) performance within the physical device and at the same time the performance of the device within the wireless network. The same solution at a communication system level is also used by leading organizations to analyze and design wireless networks, including the effect of the antennas, in complex scenarios like indoor, urban and rural

New features and benefits of Altair Feko and WinProp in the 2019 release

This webinar will give an overview of WinProp's capabilities for the radio planning with real use cases showing the performance of WinProp in topographical, built-up, industrial, and indoor scenarios including live demonstrations at the end.

Key challenges for train/metro operators are increasing traffic volumes, ensuring passengers safety and security during their journey, as well as providing real time multimedia information and access to social networks in stations and tunnels. To meet these requirements various broadband telecommunication networks based on WiFi, GSM-R, LTE need to be put in place. This webinar will show how WinProp is used for the wireless network design and deployment in various railway scenarios including tunnels and metro stations, inside train wagons, as well as along railway tracks. Both antennas and leaky feeder cables can be deployed in the 3D environment of the station/tunnel scenario including the train.

This webinar shows how Altair WinProp considers the full environment including buildings, cars, street objects in order to get accurate representations of the radio waves impinging on the installed car antennas and the multipath radar channels including reflections, diffractions and scattered contributions. For the efficient analysis the car objects can be also replaced by their corresponding radar cross sections (pre-calculated in Altair Feko). Thus allowing the realistic and fully reproducible evaluations of different options for the antennas and sensors including their integration and configuration.

Altair Feko’s broad solver technology offering is well suited to the efficient and accurate simulation of electrically very large structures. In this webinar we will offer several use cases of Naval related electromagnetic simulations using Feko. Besides more general problems like antenna placement, RCS or radiation hazard, we will also discuss special topics like ship magnetization and low frequency shielding of submarine hulls.

This webinar will give an overview and update on the EM simulation solutions (FEKO, Flux and WinProp) in HyperWorks for the aerospace industry and its segments covering applications and real use cases from antenna design and placement, EMC, RCS and wave propagation to electric machines, actuators and sensors and high power equipment.

The rapid growth of mobile and wireless communications has significantly increased the need for propagation modelling and network planning simulation. This webinar will introduce how WinProp fits into the electromagnetic simulation offering of HyperWorks, including the future plans in connection with FEKO.

This webinar will show how FEKO and WinProp are used to solve design and validation challenges related to: (a) Connected vehicles, including antenna integration aspects. The use of virtual drive tests to reduce the costs and time of extensive road tests being done to study and analyze new connected vehicle functions, and (b) Wireless power transfer systems and electromagnetic compatibility aspects which are key on electric and hybrid vehicles

Product development is becoming more challenging due to stricter regulations, and reduced development times and budgets for prototyping and testing. The necessity to add more electronics into new products is making their design more challenging and sensitive to electromagnetic phenomena and effects. This 40 minute webinar will show how different EM software tools are used in different processes and workflows to tackle these product design challenges.

The electric mobility revolution is ready to go mainstream. OEMs, suppliers, and emerging vehicle manufacturers are investing billions to develop innovative electric vehicles and optimize development and production processes to deliver e-mobility to the masses. In these presentations, learn how Altair works with the world’s leading manufacturers and suppliers to accelerate product development, enhance energy efficiency, and optimize integrated system performance.

This webinar provides an overview of a typical CAE based approach for SnR detection and prevention and demonstrates how this is achieved through a Risk and Root Cause analysis in Altair Squeak and Rattle Director. We will also discuss how to increase the complexity and fidelity of the model with the progression of development, and the importance of exploring multiple loading scenarios. Throughout the entire process, structural optimization is there as a helpful tool to find solutions to the problems we encounter on the way or even prevent them from the start.

If you are a designer, Squeak and Rattle test engineer or a maybe just a beginner to the SnR Analysis world, this presentation is for you. We will showcase how you can benefit from simulation as early as the concept design phase by performing a CAD based modal analysis combined with a material compatibility analysis, and perform a Screening Risk Assessment which provides upfront results using a streamlined and easy-to-use workflow in Squeak and Rattle Director. Webinars,Squeak and Rattle Director,Automotive,Structures,Corporate,HyperWorks